Відео

@@Andy.Gledhill.Models. Check out 'invisible aircraft' here on the FAQ - fslivetrafficliveries.com/support-faq/ - if that doesn't help then you may need to pull up your log and see if you can find anything in there or drop it in the discord.

Update: I think I found out what the problem was. Stardock Windowsblinds must have been interfering with MSFS. I could not add a per application setting in Windowsblinds because it would not open Flightsimulator.exe to add it as a per application setting. Kept saying I didn't have correct permissions to open it. So, I tried un-installing Windowsblinds. Once my PC had rebooted, the FSLTL traffic started to work. That is really strange.

@@Andy.Gledhill.Models. Very strange indeed! Glad you got it working though.

@@BobbyFuzzy Thanks for the info. I will check that support FAQ about the invisible aircraft.

@@BobbyFuzzy OK, I have reduced the airport vehicle density and worker density to 5. I have also reduced boats, road vehicle etc density to 5 too. Going to Sim Objects from the developer menu gives the following results. Nb: 733, Aircrafts: 124, Boats: 23 and Ground Vehicles 444. So, I am not getting over 1000 with the NB figure. I am now seeing aircraft parked at the airport and some taxing. But I don't think I am seeing any aircraft in the skys. I have labels turned on but don't see anything when I look around the skys.

Speak to the scenery developer, this is usually due to the fact the AI don't know where to go

When I go onto replay I can’t click track ir it doesn’t work

You need to create another camera track as explained in the video 😊

You need to create another camera track as explained in the video 😊

It is I'm afraid!

Check your sensitivity curve is flat. You could also try save the settings with the box ticked, then save again with it unticked. Something might have got messed up in the background.

@@BobbyFuzzy I will give that a shot, thank you my friend! Enjoying going through your videos!

Glad you got it working. There's a bit more info on the addon here if you run into any more issues - fslivetrafficliveries.com/support-faq/

Is this still the case after 5/10 mins? Takes a little bit for the simulation to get into motion due to injection limitations in the sim.

Hi! Have you tried reducing the number of planes injected?

Hate to state the obvious but have you checked the log? By all means jump into the discord if you need some help decoding it!

Have you checked your injection settings have not been changed in some way? Seems like quite a large change and there are no widely reported performance regressions with FSLTL.

@@BobbyFuzzy Thank I will check 😁😁😁😁😁😁😉😉😉😉👍👍👍👍

Are the axis readings moving in the EFB calibration page?

@@BluePas morning! You can change it in the MSFS menu before loading into a flight.

@@BobbyFuzzy Thank you for the answer. Could you specify in which MSFS menu? Thanks.

@@BluePas Top right on the world map I believe if I remember correctly

What part? Did you follow all the steps? What are you trying to achieve?

@BobbyFuzzy I don't have enough space to download everything and I was trying to put liveries in but it didn't work

@@Railfanningwithlogan Try freeing up enough space and then tray again from the beginning

@@BobbyFuzzy I did. I deleted everything, literally

Okay, so back to my original question, what part of the process did you not have success with? Need more specifics if I'm going to try and point you in the right direction!

Does anything appear?

Have you restarted the injector? Or your PC?

@@BobbyFuzzy both

@@BobbyFuzzy I’ve gad it for weeks

@@SocalAviation12 I believe this is covered in the FAQ on their website

@@BobbyFuzzy it said it was a glitch with msfs but I still think it’s cuz I alt f4 the game without stopping injector

Yeah I agree XP did it right! As far as I know this tool doesn't even record the weather just the flight path. I've not used it in a while though.

😂

No it's not 😊

@@BobbyFuzzy i put it but then what; i am using simbrief amd Navigraph for my flights plan's. Is that ok or i must out the same flight plan to flifhtplansdatabase to work;

You need none of the above for it to work 😊

No it just injects the planes at the right times they would show up on fr24. Everything else is handled by the sim.

Not supported by MSFS at the moment

I mean thats only natural right, you can't expect to add more objects (polygons) and textures to a 3D world and expect the performance to stay the same. If a system struggles with the sim already then yeah it would probably affect playability but if that's the case then using addons in general is probably not the greatest idea, similar to most moddable games. That all being said FS Traffic ran fine on my previous system which was a mid level 5800X3D and a 3080, DDR4. The CPU being the main factor for AI traffic addons.

Not at the same time

Check the Q&A on the FSLTL website

FSLTL for me

@@BobbyFuzzy same here, fsltl is just easier to use

I've not tried it honestly since making this video but glad to hear it's made some improvements! I thought I'd read a little while back they were working on some optimisation.

This is a fair point! Though this benchmark may be slightly outdated by now

NVM i found the answer in the online manual! Remove Nearby Traffic: Removes traffic that is active around you in an approx 5km radius - useful if aircraft are stuck in front of you on taxi or slow aircraft on final blocking your way!

Both about the same to be honest. The commercial feels quite nice against the skin but in terms of comfort there's very little difference.

Afraid not!

@@BobbyFuzzy why do none work

​@@goodatsports3069 For a few reasons but mainly because it is running an external application that is not supported on Xbox

Glad you're getting there Roy, many thanks for the comment!

This works with the stock ATC, not sure about others as I always fly on VATSIM

@@BobbyFuzzy I love it. You always give good opinions. Keep it up.

Sounds like it's not compatible with Xbox/MSFS

Afraid not!

Install the models, add the VMR to vPilot and don't bother with the injector and you're good

@@BobbyFuzzy Yikes, I meant to delete this comment because I had figured it out already. Thanks tho!

See pinned comment

Tried the reset command?

@@BobbyFuzzy how

@@glovieslol7215 VFR pilot view reset? Also double check you didn't mess with any of your other bindings whilst doing the steps in the video. Could try the default profile initially to check.

@@BobbyFuzzy ty can you do more tips?

@@BobbyFuzzy I have my mouse on default but still no

AIG is a different approach. Offline vs online. Not totally direct comparison. Both have their pros and cons. Thank you for the comment!

@@BobbyFuzzyi know dont get me wrong please fsltl is good but they are way too slow in the optimization like the share ammount of lack of liverys the poor airport parking realism in smaller or less known airport and even when they release new liverys they dont focus that much on smaller airports

@zaidooos Airport parking is down to scenery creators sadly! Smaller airline liveries etc are yeah... takes time to build them up FSLTL is a recent startup, AIG has liveries from years of work. If you're any good at liveries they are always looking for help!

Yes they can be moved lower and higher. Bare in mind that because platforms are attaching to the seat base they are *much* lower down by default than on a desk for example so you will have no problems with this. That is what I aimed for as well.

Yes!

It's a pleasure! Thanks! You could open the injector when you first open the sim and if you do multiple flights in one session it should pause between each and start again when you start a new one.

I'm not sure what to say, it's less of a faff than 90% of the programs one runs on a PC. As explained in the video the traffic is injected live based on FR24 data so your sim time or weather has no bearing. Use AIG or FS Traffic if you want the traffic schedules to move with the sim time.